276°
Posted 20 hours ago

PC-Products 087770 PC-7 Heavy Duty Permanent Repair Paste Epoxy, 1/2 Pound, Dark Grey

£9.9£99Clearance
ZTS2023's avatar
Shared by
ZTS2023
Joined in 2023
82
63

About this deal

You would of course need to catalyse this with MEKP and then you could use it in a similar way to the epoxy putty. With a work time of 60 minutes, Industrial Metal can be mixed in large quantities and allows for greater coverage over significant sections of damage. Keep in mind that anyone can view public collections - they may also appear in recommendations and other places. After using PC-11® clean up using methylated spirit, acetone, rubbing alcohol (isopropyl alcohol) or lacquer thinner to clean tools and mixing surfaces before PC-11® cures. However there is always the odd chance of incompatibility if the epoxy is for a unique use or formulation.

Available in either a 5kg or 20kg pack, please choose the pack size you require from the drop-down menu at the top of the page. Being an epoxy based mould making system, EMP60 is ideally suited for use when making epoxy based end products (like carbon fibre parts or epoxy matrix GRP/FRP).Use a flat blade (palette knife) or well gloved heel of the hand to thoroughly blend the two until uniform in colour throughout. Use to add solid colour to epoxy laminating resin, epoxy gelcoat, epoxy electrical potting resin and epoxy casting resin. For small to medium sized moulds, the high temperature laminating paste can then be used on its own with no further reinforcement necessary. The uncured materials should not come into contact with the skin: the wearing of impervious gloves of rubber or plastic along with eye protection is necessary. When applying the paste onto the gelcoat, a fresh 'wet' application of EG160 gelcoat should be used to 'couple' the paste to the gelcoat.

Personalised advertising may be considered a “sale” or “sharing” of information under California and other state privacy laws, and you may have a right to opt out. Remember to use a different spatula/tool in each tub or wipe it off with methylated spirit on a cloth/kitchen roll in between! PC-7®formulation provides extended working time, for large and critical jobs, which allow the user to reposition work or make changes.When a dispersion is then added to the bulk of the epoxy it blends in easily, ensuring that the pigment is thoroughly mixed through the resin (rather than staying in lumps).

It is recommended that the hardener is placed first onto the spot-board, flattened a little and the resin placed above; this makes for easier mixing. Our team are also artists, so we have experience using our items first-hand; we’ve put them to the test time and time again for wall art, jewellery and timber table creations. It is used for the maintenance and repair of pipes, restoring surface profile and improving integrity.Although EMP160 has an HDT (Heat Distortion Temperature) of 160°C, any air voids present within the laminate can cause blisters or imperfections on the surface of a mould or component once it is post-cured at elevated temperature. If you're looking for a putty or paste that you could use in this way then you'd probably be best making something like this by chopping up some woven glass into short strands and then mixing this (at a high percentage) into some of the coupling coat. Full instructions detailing the preparation process can be found on the Technical Data Sheet and are provided with the product. If the repair is outside and the weather is cool we’d recommend placing the tubs/syringe somewhere warm to reduce the viscosity.

Asda Great Deal

Free UK shipping. 15 day free returns.
Community Updates
*So you can easily identify outgoing links on our site, we've marked them with an "*" symbol. Links on our site are monetised, but this never affects which deals get posted. Find more info in our FAQs and About Us page.
New Comment