Tobar Magnetic Gyro Wheel

Product Information

Thank for you for this. It is interesting to see that you are also using Neodymium magnets, although in a different way to the other posts I have found. I have already taken delivery of some 4mm radius x 1mm deep magnets and have tried glueing them to the tops of the sleepers; unfortunately, whilst this works, it is not reliable. However, it seems that you have had much more success mounting them between sleepers, so that is what I will try next... I do have a question though... You write in your blog "Each strip must be mounted with opposing poles to allow the couplings to move in operate directions"... Are the magnets marked with their poles? The ones I have here are simple silver discs, so I don't see how you can tell... Hwan-Myoung, Jeoung, Jae-Wook, et al.: Development of a flywheel energy storage system using Superconducting magnetic bearing[J]. The Transactions of Korean Institute of Power Electronics 4(5), 433–441 (1999) Shan, X.U.E., Zhiqiang, F.E.N.G., Long, X.U., et al.: Research on permanent magnet attraction unit of Wall-climbing robot based on ANSYS. Manufacturing Automation 38(008), 22–25 (2016) Qingqing, S., Jin, Z., Gen, Li.: Optimization design of magnetic attraction unit based on Halbach array wall-climbing robot [J]. Light Industry Machinery 32(005), 17–21 (2014)

Wang, X., Peng, G., Wang, G.: The design of Halbach array permanent magnet for in-wheel motor[C]// electrical machines and systems (ICEMS), 2013 International Conference on. IEEE (2013)Magnetism was and has been well known, for centuries, as a direct source of energy, independent of electrical generation or storage. Tesla did not see electricity as a requirement for creating motion or work, but as only one possible source of energy. A 17th century windmill creates work without electricity, and sunlight through a lens creates heat without electricity (unless one wants to create steam to turn a turbine or driveshaft and create electricity for storage in a battery.) So, there’s a couple of angles to this. What you’re talking about is putting an inductor into a spinning magnetic field. We don’t have machines that “create energy.” We have machines that convert energy from one form to another. Real motors take electrical power as input and deliver mechanical power as output. This device has no energy input (well, clearly it DOES, since it spins, but it’s a power input that’s being hidden from viewers of the video). That is indeed the problem. I have some Kadee wheelsets here and they are considerably smaller that the UK versions; see the image below (Kadee on the left, Alan Gibson on the right): use fractal spiral magnetization similar to crop circle attached. That means the magnetization Value for each roller is different. Weakest at the very top and bottom rollers and increases to the center.

My thanks to everybody who has replied to my question. I'm pleased to say that I now have a working solution to this problem that is actually very simple... An Lei, Zhang Chunguang, Chu Shuai, Zhang Junfeng, Yang Yubing, Liu Jiarui, Li Shangqing, Liu Jiahui, Wang Zihan.: Finite element analysis of permanent magnet attraction device based on Halbach array wall-climbing robot [J]. Mechanical Research and Application V. 33 No.168(04):36–39 (2020) Lee, S., Cheon, J., Kim, C.: Global market analysis for welding power source and welding robot (I) [J]. Journal of Welding and Joining 38(3), (2020) Mag wheels” is a catch-all for aftermarket alloy wheels. “Mag” is short for “magnesium,” a metal used in many alloy wheels of the past and in the racing industry. However, now they’re developed using a magnesium alloy, not the full element.Zou, H., Liu, Z., Zhao, X., et al.: Characteristic analysis of wall-climbing robot magnet-wheel based on Halbach array [J]. Light Industry Machinery (2019) And by simply moving a couple of Kadee-fitted vehicles over it by hand, I found that uncoupling would very well without the wheels beig attracted to the magnet. This is obviously hard to show in pictures but the following should (hopefully) so that the magnet does indeed work: the north in the sketch is the earth magnetic north . I think south in regular magnets are North geographically. Not sure. 100%

Secondly, well… they DO stop spinning, you just can’t perceive it. The Earth has a rotational kinetic energy of 2.138×10How does this apply to orbital mechanics? Actually, the theory of constructing a device that extracts electrical energy as an orbital body moves in and out of a magnetic field is very sound and would work. Sadly, Earth’s magnetic field prevents this from working on earth. A moon of Jupiter, however, could pull this off. Many have said, “but this violates the conservation of momentum! The planet keeps spinning!” Actually, it doesn’t. There’s two sides to the story of orbital mechanics. The truth is, the entire Universe is made of electricity and we have only to learn how to harness it, motivate it, channel it. Don’t worry — it will come to us when we’re ready (just about now). Just as archeologists have, with some chagrin, had to retract their previous beliefs on how old intelligent man really is (millions, not thousands, of years), electrical science will have to retract on the Law of Conservation — it is simply not true. Or I should say, it “will no longer be true once the previously undiscovered energy types are discovered.” The converse of this is, of course, that the definition of insanity is trying to same over and over and expecting different results. Haihong, WU., Zhou, Z.: Test of all position automatic welding technology for super large diameter steel pipe with one-sided welding and double face forming [J]. Guangdong Water Resources and Hydropower (2019)

But, there inlies the true rub. The government requires that people are dependent on them. Nikola Tesla was made to appear crazy when he proposed that “free energy” existed. The only reason his idea of an electric dynamo was allowed to exist is that the government found a way to charge people for the power it produced and make them wholly dependent on it. Over the years I have been asked to test dozens of similar devices using magnets and they all falter in the same way. Some inventors say that they take the energy from the aether but a normal magnetic motor has no means to do it. In the future we may be able to find a way to utilize the aether for power generation but not today. So to summarize: You use masses of power to magnetize the magnets…you then use means to demagnetize these magnets and that power is what is driving the motor. This isn’t free energy though. That antenna will put a drag on the moon and if you made enough antennas and had them sipping power long enough, the moon would slowly stop spinning. It’s just that the amount of power behind the spinning of the moon is incomprehensible compared to what you’d be extracting, like stealing sand off the beach. You ARE depleting the beach, but who’s going to notice? If you do it every day for 80 years… eventually there’ll be a hole someone will notice. To all of you who see this and become excited over it: crafting your beliefs based on what you wish could be true is folly. Educate yourself.So you’re quite right –“perpetuality” (that doesn’t seem to be a word, but it sort of ought to be) is not the point. Storing and delivering energy is the point. Takeda, M., Shimoyama, I.: Analysis of the vertical driving performance of multiple connected pipe-climbing microrobots with magnetic wheels [J]. Micromachines 10(8), (2019) just make sure the attraction level for each roller to core are equal in every level after utilizing fractal magnetization. Having researched a little further, it would seem that the real problem here is the length of the Kadee uncoupler (this includes the electromagnetic type; I have both types here); using a much smaller and precise magnet may completely avoid the problem. Here is a topic I found: One, is that the input energy is forgotten. The energy that put the planets into motion in the beginning is an insane, mind boggling amount of power. More energy the mankind has collectively used over the course of civilization, and probably for the next several centuries even. We can calculate it, and count the zeros, but you really just can’t comprehend the sheer enormous amount of power that set that in motion.