Johnstone's Garage Floor Paint - Black 250ml

Product Information

The coverage rates will vary depending on surface being coated and the particular product range being used. Paint for Garage Floors is suitable for use on all concrete floors as well as being ideal for the renovation of properly prepared tiles, brickwork, wood, cement and stone surfaces. First, garage floor paint helps keep dust to a minimum: concrete floors generate a lot of particles that float around in the air, particularly if your garage is draughty.

Black Paint | All Black Paint | Wickes Black Paint | All Black Paint | Wickes

It’s suitable for internal concrete, steel and wooden floors in light to medium traffic areas, so is perfect for garage floors. That means you’ll need to move everything out of the garage, fill any major cracks, sweep up dust and detritus, and give the floor a jet wash using a degreaser, if needed.Leyland says it’s suitable for smaller outside areas, such as for marking walkways, but not larger areas. Epoxy paints are far more hard-wearing but are significantly more expensive, and require the mixing of the epoxy resin paint and a catalyst in the correct quantities. Some paints will require a primer, and some don’t – though for the very best jobs, a good-quality primer is usually recommended.

Ronseal Diamond Hard Floor Paint - Satin Black 2.5L Ronseal Diamond Hard Floor Paint - Satin Black 2.5L

Contains 1,2-benzisothiazol-3(2H)-one and reaction mass of 5-chloro-2-methyl-2Hisothiazol-3-one and 2-methyl-2H-isothiazol-3-one (3:1). Pay attention to the drying time, but a good rule of thumb is leaving a day before you walk on the floor, and a week before you drive a car over it. It’s resistant to many chemicals, plus dust and moisture, and will withstand regular washing with water. And Floorsaver offers additional anti-slip aggregate to add into the mix if you want a grippier surface. Floorsaver’s paint is a two-part epoxy which can be applied to bare floors and previously painted surfaces alike: for the former its maker recommends two coats, but just one if you’re covering existing paint.It’s essential that the area you’re working in is well ventilated, and you’re using suitable masks – more so if you’re using epoxy paint. Ideally flooring paint should be applied to a dry and dust free surface that has been suitably cleaned, prepared and sealed prior to application.