Furniture Clinic Wood Stain (Natural Oak) – Fast Drying, Highly Concentrated, and Easy-to-Apply Wood Stain for All Indoor & Outdoor Wood – Water Based & Non-Toxic – 250ml

Product Information

By following these steps, you’ll be well on your way to creating a beautiful, long-lasting finish on your oak project. You may find that this is what has occurred on your banister and I would think that sanding may be the best way to restore the natural colour of the wood. If the effect has penetrated fairly deeply then a Fiddes Oxalic Acid Crystals may also be worth considering, a test area is strongly advised. Thank you for getting in touch with your enquiry. There are not many coloured varnishes on the market, because a better result is nearly always achieved by using a stain to give colour and then a clear varnish to seal and protect. There are a few exceptions to this, white for example, because a clear product over white will nearly always yellow.

The above technique will help you create a natural appearance of the oak grain, but you will need to practice the strategy in advance. Selecting the right sandpaper: Start with a coarser grit (e.g., 100 or 120 grit) and gradually work your way up to a finer grit (e.g., 220 grit). This progression helps to remove rough areas and then smooth out the surface. Most importantly the undertone color of Minwax golden oak is so neutral and oak wood grains are clearly visible even after the application of stain. Grain gets dark brown color instead of redness.

Our Products available in this colour

Both white oak and red oak stain well and evenly and make sure to apply the stain along its grain for the best results. If oak is being oiled it is a good idea to sand it with sandpaper that is no finer than 150 grit. The reason for this is that the pores of the wood are more open thus allowing the oil to sink into the wood better. Better absorption equals greater protection. If you plan to use a piece as any type of tabletop or anything that will get a significant amount of touch or use, I would absolutely apply multiple coats of sealant over the stain. What is the best stain color for oak floors? There’re some factors you should consider before applying wood stain on your oak furniture or woodwork. Both red and white oak can be stained effectively, but their different characteristics may influence the final appearance of the stain.

Clear wax polish is the one exception to the above… If a clear wax polish is applied to bare oak (or just about any other wood for that matter) then the colour is kept very natural indeed, it’s just a question of whether a wax polish is going to be durable enough. Internal doors, for example, are considered, by most people, to be ideal for finishing with wax, whereas a floor will look nice once waxed but regular maintenance is required, so most people don’t opt for wax for this reason. When I tried various stains and paid attention to these factors, I was able to achieve spectacular results that showcased the inherent beauty of oak.

Why does Oak turn black?

It doesn’t even matter if you’re working with white or red oak because those products give an even uniform tone all over the surface without destroying the beautiful red color wood grain. stained oak wood outdoor dining table Red oak, for example, possesses a warm, reddish hue, while white oak showcases a more neutral tone.