ELEGOO Saturn 2 8K 3D Printer, MSLA UV Resin Printer with 10 inch Monochrome LCD, Air Purifier and Screen Protector, 219x123x250mm Larger Printing Size

Product Information

With some of Elegoo’s earlier printers, this guessing has yielded softer prints that were often gouged with the spatula upon removal. He lives by the sea in West Cornwall where he plays piano, bass and guitar equally badly and is an avid collector of microphones and opinions about all things audio.

Prints can and eventually do fail even on resin printers, though I did not experience any failed prints on the Saturn 2 myself. However, if you want this level of detail and build volume together, the Saturn 2 8K is hard to beat. With its multiband design and per-band feedback, dynamics, drive, tone and modulation options, Saturn 2 will bring a unique flavor to your music. Atmospheric thrust suppression reduced the five Rocketdyne J-2 engines' 1,000,000 pounds-force (4,400kN) of vacuum thrust to 546,500 pounds-force (2,431kN) at sea level, [2] insufficient to lift the 1,364,900-pound (619,100kg) weight of the two stages, even without a payload, off of the ground.If you want something with a smaller footprint and you like Elegoo, you may consider going with the Elegoo Mars 3. The vehicle had a LEO payload capability of 92,000 pounds (42,000kg) with a gross weight of 1,112,000 pounds (504,000kg). I gave it another rinse in the rinse tank in hopes that the water would now be able to get into the nooks to help remove any additional resin. Another feature that I’m really happy to see on this model is that the power switch that is on the rear of the Saturn S has now been replaced with a power button on the front of the Saturn 2, making it very convenient to turn on and off. Eleven configurations were studied, using between four and twelve solids, with some being started at lift-off, and some being started in flight, and varying propellant loads in the Saturn stages.

One of the more interesting design features is a removable panel in the rear of the UV cover that can be used to connect to an exhaust ventilation system to help further reduce odors for people who operate in small spaces and are concerned with fumes. Budget constraints led to cancellation of the study and exclusive use of the Space Shuttle for orbital payloads. Next, you will want to press the home button to lower the build platform until it rests squarely on the card. There are two pairs of latex gloves and two surgical style masks for personal protection, but you will probably want to get some higher quality masks and additional gloves for working with resin. After that, I dipped it in water briefly and used the brush included with the water washable resin to loosen up any more resin residue.Final Report - Studies of Improved Saturn V Vehicles and Intermediate Payload Vehicles (PDF format), October 7, 1966. The new distortion styles, nearly twice as many, included ‘Subtle’ versions of the Tape, Tube, and Saturation styles for warmth and four new guitar amplifiers, three Transformer styles.

It is not possible for us to draw any conclusions about you, and any data collected as a result will never be passed on to third parties. I oriented with the face pointing away from the build platform so that there would be fewer supports on the face. This model was a little too large for this printer at the full size, so I chose Scale to fit, which came out to around 75% or the original size. After printing, the model will still likely have some leftover resin on it and, to get a resin print to look its best, you will want to clean it.To start with, I loaded my model into Chitubox Pro just as described above and got it sitting at an angled orientation. The sandblasted build platform guarantees the highest possible adhesion of the print result - the risk of detached, unfinished prints is minimised in this way. If you are looking for a mid-sized 3D resin printer or you need to print in a high level of detail, you really can’t go wrong with this printer. On the earlier generations of printers, a regular piece of paper was used to compensate for the thickness of the FEP film, but a thicker card is now used because the new FEP 2. For the prints in this review, I used some of Elegoo’s water washable resin because it was thinner than the low odor resin I had used previously with other resin printers and I wanted to bring out the details so the prints would come out better.