Joined in 2023 
82 
63 About this deal
Dip a ClearWater® Test Strip in the centre of your Lay‑Z‑Spa, remove and hold it still for 15 seconds. As with all chemical products, instructions and warnings should be followed and heeded very carefully. For high chlorine levels above 5ppm, we would suggest you drain the Lay-Z-Spa to the minimum mark and re-fill with fresh water to the maximum mark, this will help to dilute the excess chemical. Or, remove the cover from the hot tub to allow evaporation of the chemical (keep the spa filter running constantly). Clearwater Foam Remover is designed to control and prevent foaming in your hot tub, which is typically caused by the reaction of water with shampoos, deodorants and natural body oils present on the user. If you are going away we would suggest emptying the pool and cleaning it so the water is not left to go stagnant. Do no re-fill until you return from your trip.
Chlorine is a sanitiser that controls and prevents bacteria growth and is essential for the hot tub water to be clean and safe to use. The recommended Free Chlorine* level in a hot tub is 3-5ppm (parts per million).
Chemical Water Treatment
Total Alkalinity (TA) is the measure of your hot tub water’s ability to neutralise acids. Balanced Total Alkalinity helps control the pH levels and the correct level to aim for is between 80 and 120 parts per million (ppm). For low pH levels below 7.2 you will need to use pH Plus to help raise the pH levels and balance the water. Clearwater Clarifier contains flocculants which bind small particles of debris and algae together so that your Lay-Z-Spa filtration system can adequately remove them, resulting in clean and sparkly water. This is a very effective way of preventing your spa water from looking dull and cloudy, due to the build-up of dead algae and debris that is too small to be trapped by your filter. Even if you have treated your spa for algae using Clearwater Algaecide, it is recommended that you use the Water Clarifier to remove any residual debris.
If your above-ground pool or hot tub has been treated for algae using ClearWater Algaecide you’ll need to wait 24h and use the water clarifier to help clear away left-over residue.This swimming pool clarifier contains flocculants which bind the small particles together so that a pool’s filter will be able to catch them. If you have used Clearwater’s Algaecide then you will need to use the Clearwater Clarifier to clear away the residue.
Make sure the pH level of your water is between 7.2 and 7.6 before using the clarifier. You can use the Clearwater pH Plus and pH Minus to do this Remove cover from pool to allow evaporation of the chemical (keep the pool filter running constantly). ClearWater® is our chosen and recommended chemical provider. Developed with Lay-Z-Spa in mind, the range of ClearWater® hot tub chemicals includes everything needed to make sure your Lay-Z-Spa's water stays safe, clean and clear. Explore the table below which includes each product’s use and function. Effectively Treats Cloudy Or Uninteresting Taking a look Water: Which may also be as a result of dead algae, skin cells, dust and dirtThis TA Increaser helps raise Total Alkalinity levels, which in turn will help control pH levels and chlorine. pH measures how acidic or alkaline your water is and the ideal range for hot tubs is between 7.2 and 7.6. Balanced pH is necessary for other chemicals to work properly and imbalanced pH levels can impact your hot tub components and cause skin irritation.
Great Deal 
New Comment