Clear water Hot Tub, Pool and Spa Test Strips x 50-3 in 1 - Measures Chlorine, PH and Total Alkalinit (Pack of 1 (50 Strips))

Product Information

The Clearwater® Dip Tests are manufactured by the founders of dip testing in the USA and are the most accurate available on the market so you know you're getting an accurate reading every single time. The rapid dissolving Clearwater® Chlorine Granules are an essential sanitiser for hot tubs and an easy way to maintain clean healthy water. If you are going away we would suggest emptying the hot tub and cleaning it so the water is not left to go stagnant. Do not re-fill until you return from your trip. Never use unlabelled chemicals and please read the instructions before use. Avoid getting chemicals in eyes, on skin or on clothing. Avoid breathing vapours when opening a container. Avoid creation of dust. Never add water to the product. Always add product to large quantities of water. Use separate clean dry utensils for each chemical and clean after use. Do not add the product to any dispensing device containing residuals of other products.

Need it in a hurry? We are also able to offer before 12 noon and Saturday delivery services. See here for information on these services Never mix different chemicals in concentrated forms. This includes the kit products but also with other products like bleach or weedkillers – a dangerous reaction may occur. Not balancing the Total Alkalinity levels in your hot tub can cause a number of issues that can impact your spa experience. Dip a ClearWater® Test Strip in the centre of your Lay‑Z‑Spa, remove and hold it still for 15 seconds. Clearwater pH Minus , also known as ‘pH reducer’ is the most simple and effective way to decrease the pH of your spa water when it has surpassed the recommended level. pH minus can also be used to lower TA (Total Alkalinity) levels.Total Alkalinity (TA) is the measure of your hot tub water’s ability to neutralise acids. Balanced Total Alkalinity helps control the pH levels and the correct level to aim for is between 80 and 120 parts per million (ppm).

For high chlorine levels above 5ppm, we would suggest you drain the Lay-Z-Spa to the minimum mark and re-fill with fresh water to the maximum mark, this will help to dilute the excess chemical. Or, remove the cover from the hot tub to allow evaporation of the chemical (keep the spa filter running constantly). Around 60% of UK households are in hard or very hard water areas. To avoid scale build-up (which can impact water quality and pump components) use a weekly dose of ClearWater Scale & Stain Controller. ClearWater® is our chosen and recommended chemical provider. Developed with Lay-Z-Spa in mind, the range of ClearWater® hot tub chemicals includes everything needed to make sure your Lay-Z-Spa's water stays safe, clean and clear. Explore the table below which includes each product’s use and function.The hot tub and pool test strips highlight, chlorine levels, the water’s pH and Total Alkalinity levels. There are three separate sections on each strip to indicate each individual level.

Dip a ClearWater® Test Strip in the centre of your Lay-Z-Spa, remove and hold it still for 15 seconds.

General Safety Tips

Dissolve the quantity of Chlorine Granules in a jug of warm water and pour into your hot tub. Activate the AirJets for a few minutes to circulate the chemicals evenly throughout the water.

Every attempt should be made to avoid mixing spilled material with other chemicals or debris when cleaning up. Do not attempt to reseal any contaminated drums. Do not transport wet or damp material.

Chemical Treatment Summary

pH measures how acidic or alkaline your water is and the ideal range for hot tubs is between 7.2 and 7.6. Balanced pH is necessary for other chemicals to work properly and imbalanced pH levels can impact your hot tub components and cause skin irritation.