Dell WYSE 5070 1.5GHz J4105 1200G Black - Thin Clients (1.5 GHz, J4105, Intel Celeron, 2.5 GHz, 4 GB, DDR4-SDRAM)

Product Information

and the 'extended' (wide) item - Regulatory model N12D. There are also two CPU options. The size/type The highest usage I saw was during boot where it hit a whopping 15 watts. Oh, and I’m dangling an additional SSD off a SATA wire to use temporarily as a boot drive since I was doing other testing with this server, so that 5.7 watts includes this guy: sata wire With the power to see up to four 4K displays and two 2K displays at once, you can construct the ultimate setup option that best suits your content. PCIe NIC shorted out on the case, needed to bend a bit of the card cage out of the way to stop it shorting on the solder pins of the NIC. Dell is positioning the Wyse 5070as a highly-configurable virtual desktop infrastructure (VDI) client platform. The Wsye 5070’s configuration ensures its functionality is suitable for a wide range of situations, from being a basic VDI client for task workers to being one that supports the most demanding of workloads. More specifically, the Wsye 5070 has 21 ports for connectivity, supports five different OSes, two different CPU families, many different memory and storage configurations, and all common remote display protocols. Additionally, it can be configured to support up to four 4K monitors and two 2K monitors, thereby satisfying the most demanding of users.

After I disconnected from the virtual desktop, I pinged the Leostream connection broker and found that the round-trip time (RTT) was 98ms. Given the fact that the Leostream connection broker and virtual desktop were in an AWS datacenter located on the East Coast, and I am on the West Coast, I was surprised to find that a virtual desktop with this much latency performed just as well as a virtual desktop that was hosted on-premise. Safe and secure: Enjoy peace of mind with the ultimate virtual OS for Malware and Intrusion resistance with Dell’s exclusive Wyse ThinOS. Hard drive retention: Hard drive retention is not available on models with a soldered hard drive, including XPS 9315 2in1, Chromebooks or Venue tablets, except the Venue 11 Pro. Het systeem wordt automatisch opnieuw opgestart en werkt het BIOS bij in het welkomstscherm van het systeem. Nadat de BIOS-update voltooid is, wordt het systeem nog een keer opnieuw opgestart.

Dimensions & Weight

The client was able to detect all the monitors, even the IBM L150, which was manufactured in 2003. I was able to use three of the monitors to display applications, which was not surprising as Horizon only supports three monitors. When I tried to connect to the vGPU-enabled virtual desktop by using PCoIP, the resolution was incorrect and the desktop was unusable. When I connected to the same desktop using Blast, however, the monitors were display correctly and I could use all the monitors except the L150.Figure10 below is a screen capture I did while connected to the client using VNC to show eDrawaings Pro, Autodesk, and ArcGIS, which were all displayed on different monitors connected to the 5070. I was very happy with the responsiveness of the three applications; all three behaved as if I was on a very powerful local system. While using the applications, I monitored the CPU usage and found it was consistently in the teens, even when I rotated and zoomed in on the applications. I suspect that the GPU was doing much of the display work, but I could not find a way to monitor its usage. Simple. Secure. Streamlined: Dell’s exclusive Wyse Management Suite sets the industry standard for a powerful, secure and highly scalable solution for managing and optimizing endpoints.

On the ThinOS desktop in the lower left corner, there is a settings icon that navigates to a menu that is used to configure the device, with options including: screen configuration and display topology, networking, displaying information on the operating system of the Wyse 5070 (Figure 11), and the ability to perform other activities for the device. I used the settings menu to configure the topology of my monitors and set the DHCP server for the device, and I found the menu easy to navigate and intuitive. With the widest range of vendors on the market, you can enjoy the most complete VDI support with certified VDI brokers like Microsoft, Citrix and VMWare. I first connected to a Windows Server 2012 RDSH virtual desktop using the Blast remote display protocol. The virtual desktop detected my 4K monitor (Figure4), and displayed it in full screen mode.Serial port. It would have been nice to turn this into a console redirection port for a sort of out-of-band access, but I couldn’t figure it out. For the remainder of the time that I worked with the Wyse 5070, I configured it to connect to the Lenovo P27 4K monitor and the Dell 24” U2412M monitor. I used a local Horizon virtual desktop to do my daily tasks. The Horizon virtual desktop ran Windows 10 (1607), and had 2 vCPUs, 8 GB of memory, and 50 GB of NVMe SSDstorage. Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller (rev 15) Accidental Damage-Additional Information: Accidental Damage Service excludes theft, loss, and damage due to fire, flood or other acts of nature, or intentional damage. Customer may be required to return damaged unit to Dell. Limit of 1 qualified incident per contract year. For more information, consumers visit Accidental Damage Service Contract (Consumer) or commercial customers visit Accidental Damage Service Contract (Commercial). Estimated valueis Dell’s estimate of product value based on industry data, including the prices at which third-party retailers have offered or valued the same or comparable products, in its most recent survey of major online and/or off-line retailers. Third-party retailer data may not be based on actual sales.

You can use Wyse Management Suite for central management of Wyse VDI clients. These management suites can be obtained from Wyse, but neither came with the system and I did not work with either of them while testing the device. ConclusionI ran a number of different tests to try and show how this thing might perform in real world usage. Speedtest Easy to start. Easy to use: Get up and running fast with certified trouble-free deployment, no matter which broker environment you choose. LAN can see DMZ and Internet, certain DMZ hosts (my phone, laptop) can see some stuff on the LAN, and IoT can see nothing but the Internet. With about ~70% usage on a single core out of four, this little J5005 doesn’t do too terribly. File Copy – CIFS

The real test of a virtual desktop client is its usability. To test the usability of the Wyse 5070, I used the client for three weeks with various configurations. Below are the key results during my time using the client. If you read through the config above, you’ll notice I dropped in the config for a WireGuard tunnel to my main router. The first test was just a normal speedtest. If someone were going to install this for their primary firewall and router, this is probably the first thing they would do: basically gigabit speedtestTowards the left, you see the blue USB internal header that could be used for an internal USB drive. Oh sweet, glad you like it. Did you have any issues getting things up and running? I had a couple (which were fairly easy to overcome): In this review, I’ll give an overview of the Wsye 5070 VDI client’s specifications, and design and build of the extended chassis, based on the model that we received from Dell. Then, I’ll outline the testing on the device I carried out over the span of three weeks and the key findings from those tests. Lastly, I’ll provide some final thoughts about the device and briefly discuss who would benefit most from purchasing this product. Wyse 5070 Specifications *Although specifications will vary depending on configuration, here is a general overview of Wyse 5070’s specifications Manufacturer