276°
Posted 20 hours ago

SCYTHE SCFM-2000 FUMA 2, CPU cooler - 2x120 mm

£9.9£99Clearance
ZTS2023's avatar
Shared by
ZTS2023
Joined in 2023
82
63

About this deal

So, even though the Fuma 2 did not cool as well as it could have, that extra four degrees in the tank hurt them a bit, but all around, we have very little reason not to recommend you buy this cooler, no matter what the motherboard is, no matter your memory arrangement, the Fuma 2 is here ready and willing for you to give it a chance! The FUMA2 is now at a nice 38c, 8c above ambient (its summer here)...the water cooler wasnt that good on its first day :) Decidí darle una oportunidad al ventilador de CPU SCYTHE FUMA 2 SCFM-2000, ya que mi procesador Ryzen 7 5800H tiende a generar mucho calor y necesitaba una solución eficaz. Prior to testing at each TDP level, I would run AIDA64 CPU & FPU Stability test for one hour to soak the room with the heat generated from the CPU to ensure consistency in results. Acoustics The first tests were done with a TDP enforced at a 100w limit, because most consumers considering this cooler will likely be using a mid-range CPU like the Ryzen 5 3600x. Both coolers performed on par with each other – with the FUMA 2 winning some tests by a small margin, and the NH-U12S winning other tests by a small margin.

There is no doubt that we kept bringing up the SE-207-XT Advanced, and that is because, currently, it is the class leader. However, that does not mean that is the end of the discussion. The 207 does not make concessions for anything, really. It is a large dual-tower design with loud fans, and while performance is king, we hope you are cool using low-profile RAM because ID-Cooling felt it wasn't that big of a deal. This is where a cooler like the FUMA 2 Rev.B stands out. It can run close to the competition but also makes concessions to RAM clearance and eases off the noise emitted into your ears. Both of the Kaze Flex 120 II fans use a sealed fluid dynamic bearing (Sealed Precision FDB) that reduces friction and wear to a minimum thanks to a special oil film. Rubberised pads covering the frame have a decoupling effect and prevent the transmission of noise and vibrations to the case. H.P.M.S. IV (Hyper Precision Mounting System IV) Estoy encantado de decir que este ventilador está funcionando a la perfección. Mantiene mi CPU a una temperatura óptima incluso durante las tareas más exigentes. No más preocupaciones por el sobrecalentamiento. This change of mind return policy is in addition to, and does not affect your rights under the Australian Consumer Law including any rights you may have in respect of faulty items.

Sin embargo, debo mencionar que la limpieza puede ser un proceso algo complejo debido a su diseño. Asegurarse de que no se acumule polvo en las aletas puede ser un desafío. This article was updated on June 17, 2021 to show equalized graph settings (i.e. minimum 50, maximum 70) in benchmarks except for Cinbench R23 & AIDA64 (which ran above 70) Fan 2: 120 mm Kaze Flex PWM (4.0 - 24.9 dB (A), 300 - 1200 rpm, 28.2 - 86.93 m³ / h) (16.59 - 51.16 CFM) , 0.076 - 1.05 mmH2O

Fan 1: 120 mm Kaze Flex PWM (2.7 - 23.9 dB (A), 300 - 1,200 rpm, 14.06 - 57.52 m³ / h) (8.27 - 33.85 CFM), 0.23 - 0.9 mmH2O Side note: I bought the Scythe Fuma 2 around late October and I live in the Southwest United States. I have yet to see how this CPU will perform with the summer heat. That will be the true test. I will update this review around October for the results. I tested both the Noctua NH-U12S and the Scythe FUMA 2 in my home’s computer room with central air set to 73F. Both coolers were tested using Noctua NT-H1 thermal paste. My apologies for making more than one post about this. I can be a bit indecisive at times and I am not the most knowledgable on CPU coolers that work with NR200 builds.The mounting kit offers very high compatibility for AMD and Intel processors. In addition, with its sturdy screw connection, it guarantees a secure fit of the cooler even during transport. Thermal paste and installation instructions are also included. In addition to the heat sink and fans, Scythe also includes thermal paste, a screwdriver, and additional fan clips so that you can install a 3rd fan for increased cooling performance if desired,. Installing the FUMA 2 So ya probably wondering what that asterisk on this review's headline is for. Simple: I am NOT a computer expert. I am not constantly finding the ins and outs of how to build the next super computer for our future robot overlords. I'm just a gamer/video editor who Google'd "How to build a PC on a budget" one day and eventually came here. If you're looking for the right cooler for your PC build, take what I say with a grain of salt and do your own research like I did. That being said, I bought this fan half a year ago on a budget and wanted to test it out before I wrote this review. My PC specs are as followed: This change of mind return policy is in addition to, and does not affect your rights under the Australian Consumer Law including any rights you may have in respect of faulty items. To return faulty items see our Returning Faulty Items policy.

Intel LGA2066, LGA775, LGA115x, LGA1366, LGA2011 / 2011-v3 - AMD AM4, AM2, AM2+, AM3, AM3+, FM1, FM2, FM2+ * There’s more to a cooler than just it’s heat sink. The fans included have a huge impact on cooling performance and noise levels. Included with the FUMA 2 are the Kaze Flex 120 PWM and the Kaze Flex 120 Slim PWM fans. Fan 1 Además, ten en cuenta que este ventilador es bastante grande, por lo que necesitarás una caja espaciosa para que encaje de manera adecuada en tu configuración. Asegúrate de tener suficiente espacio antes de adquirirlo. In my previous post, most people recommended the Fuma 2. After doing some research I’ve found that these two Scythe coolers are my best options in terms of price to performance. Performance-wise, they are fairly similar. Fuma has slightly better performance. Mugen has better noise levels. Mugen is cheaper. Ive owned Noctua in the past, on this PC prior to the MSI excursion (im not wasting my time on water gadgets ever again) but decided to give this a go on recommendation, its the easily equal of NoctuaAsymmetrical design allows unrestricted use of any front RAM slot, and cut-out fin design gives clearance(55mm) of rear RAM slot(LGA2011/2066). Standing only 155mm tall, the cooler fits most PC case on the market. Considering the 207 had the pleasure of taking air from a matched pair of 25mm fans, it is easy to see where the thermal advantage comes from, but all things considered, we feel that the Scythe FUMA 2 Rev.B is the obvious choice of the two. To top it all off, they are nearly identical in cost, so it's down to big and bulky, or big, but pleasant, you make the call. To top it off it replaced a faulty MSI water cooler (my first water cooler MAG Coreliquid 240R) that was dead within 2 months and melting my thermal paste literally at 90c and almost cost me my PC

Asda Great Deal

Free UK shipping. 15 day free returns.
Community Updates
*So you can easily identify outgoing links on our site, we've marked them with an "*" symbol. Links on our site are monetised, but this never affects which deals get posted. Find more info in our FAQs and About Us page.
New Comment