About this deal
Up to now, nothing stands out as GREAT about the software available for the R5S and this enclosed unit gets HOT when running Android. NVMe SSD installation, soldering an SPI flash, connecting some GPIOs, an RTC battery, or a UART to TTL debug board.
You were playing with FriendlyWrt, a customized version of OpenWrt developed by the FriendlyElec team. If ifconfig -a sees wlan0, but the hotspot is not working properly, try changing the channel and country code, an inappropriate country code can also cause the WiFi to not work. which I have opened for sharing with samba4, which I have installed Openwrt, is between 70-80 megabytes for file copying and downloading.What exactly does this mean and what do I need to check in samba settings, it starts at 288 megabytes per second and goes down.
Unfortunately, we didn’t have time to check this option, but we wanted to explain the value of adding a storage card. The results are a far less from the theoretical advertised read speed of the drive which is 2400MB/sec.com torvalds/linux/blob/65d6e954e37872fd9afb5ef3fc0481bb3c2f20f4/arch/arm64/boot/dts/rockchip/rk3588-nanopc-t6. Since then, the range has received a few upgrades — the most recent being the NanoPi R4S, a dual-gigabit design with a Rockchip RK3399 six-core CPU. I’d say we’ve already got every need covered by the DietPi-Bullseye image or the FriendlyElec Bullseye image that exist by now. If putting it on it makes ksoftirqd pop up, then they’re hindering each other, and you’d rather change the RPS setting to free another core and use it for iperf.
You can check the status by connecting an HDMI monitor (as shown above), or checking out the LEDs on the device. Just keep in mind that it is most likely that the metal case lower cover might not close correctly if you plan to add this expansion card. For my testing I put the prebuilt image on a micro sd card and booted holding down the maskrom button for around 5 secs before plugging the SBC back to power. x86_64-aarch64-linux-gnu/bin/aarch64-linux-gnu-gcc -std =c99 -Wall -Wextra -pedantic -MMD -ggdb -c -o libflow. As I want to control all connections, I would like to install the control router between the fiber box and the ISP box.
The main specs of the NanoPi R5S are listed here, but I’ll mention the ones that I consider the most important. Note that since I’m using a wall power meter any efficiency loss in the power adapter (Khadas VIM4 USB-C power adapter) will be included and the values may be higher than with a USB-C power meter. When you boot with the microSD, a simple GUI will pop up, designed by FriendlyElec company, making this task super easy and fast, even for no tech geeks with previous experience.